How to profit rubber wristbands,silicone wristbands perth
A mosquito repellent wristband is made from high quality silicone together with lemongrass, lavender, clove and other natural plant oils. And the natural plant oils is the reason why it is mosquito resisting.
A mosquito repellent rubber bracelet is comfortable to wear on the wrist or leg as its good air permeability . It is designed as non contacting type of the controlling module so safe for adult and kids.
When summer comes，weather get better. Good to go outside when everything get fresh. An anti- mosquito rubber bracelet is needed to protect ourselves. Not only mosquito but also the other insect.
Many people are wondering how to make the embossed or debossed effect on the silicone wristband customized. The important difference in the production process from a normal plain silicone wristband is to make the embossed or debossed mould first. This kind of mould is made from copper with the logo inside. When it extruded the silicone , the logo will be one the band.
Silk screen printing is applied for printed silicone bracelets. Modern screen printing technology is making screen by photoengraving method using photosensitive material ,oil paintings, prints, posters, name card, binding covers, packaging, commodity, textile printing and dyeing, glass and metal plane carrier. And also this is the printing method for the printed silicone bracelets.
With the long term use of a rubber wristband, we will find it full of dirt things. So how to clean it become a question.Here a simple way for cleaning. First place the rubber wristband in warm water for 3-5 minutes. Then gently rub it a few and put it to cool dry place. Detergent is recommended if the previous method does not work.
de and popular. Among them, no big-name stars use it as their decorations, making you cool and full of flavor! As for the production process of silicone wristband, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone wristband.
Design of artwork
The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer"s requirements.
The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production will be quick.
According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal.
The materials rsilicone wristbands perthequired for each wristband are weighed by an electronic scale. Generally, the wristband weighs about 5.5 grams.
Upper die production
After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day.
After the wristband is produced, the product shall be inspected and checked, mainly to see if it meets the specifications. If it does not meet the specifications, it will be discarded.
Each wristband is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces).
Finished product inspection
After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified products, they will be scrapped.
After the repaired products pass the inspection, they shall be packaged according to the customer"s requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers.
Inspection before sealing
After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.
silicone-wristbands-size-chart silicone wristbands pertht="rubber wristbands" src="https://www.24hourwristbands.ca/upload/2019/20190507/175708_8779.png" width="350" height="350">